您好,欢迎来到昆山台顺测试科技有限公司网站!
0512-57793190 微博 微信 分享
Technical Bulletin
Technical Bulletin

Maintenance of vacuum oven

Author: ComeFrom: Date:2014/12/23 15:51:29 Hits:1012
Maintenance of vacuum oven:
1.vacuum box shell should be effectively grounded or protective zero terminating, in order to ensure the safe use.
2.vacuum box does not need continuous pumping when in use, first close the vacuum valve, then close the vacuum pump power, otherwise the vacuum pump oil to flow backward into the box.
3.remove the items to be processed, such as processing is flammable, must be cooled to temperatures below the ignition point, can put in the air, so as to avoid the occurrence of oxidation reaction caused by combustion.
4. Kunshan Tai Shun vacuum box no explosion-proof device, not into the explosive materials drying.
5.and the vacuum pump, vacuum box best cross filter, to prevent damp body into the vacuum pump.
6. when necessary, please do not open the door, so as not to damage the electrical system.
7. vacuum box should be installed special air switch.
8. electrical insulation intact, the casing of the device must be reliable grounding protection or protective zero terminating.
9. the vacuum pump vacuum pump oil should be changed frequently.
10. remove the processed items, such as processing is flammable, must be cooled to temperatures below the ignition point, can put in the air, so as to avoid the occurrence of oxidation reaction caused by combustion.
11. the general vacuum oven no explosion-proof device, not dry into the explosive.
12. the electrothermal vacuum drying oven is used, there must be a special care to ensure the normal operation of equipment.
13. electric vacuum box is not used for a long time, should be in the studio items removed and wipe clean, keep the device dry.
14. electric vacuum box abnormal phenomenon, should be timely inspection, repair, if not accurately determine fault to shun contact technical department and the Kunshan taiwan.

Vacuum oven maintenance:
1. vacuum box should be kept clean, the box door glass application of soft cotton cloth to wipe, do not use chemical solvents react to wipe, lest produce chemical reaction and scratches glass.
2. such as vacuum box is not long, should be coated with neutral oil or vaseline in plated parts, in order to prevent corrosion, and sets of plastic film cover, anti in dry room, so as not to affect the use of electrical parts damp.

Next:Nothing
0512-57793190